IBM Netfinity ServeRAID-4H Ultra160, User Reference

Page: 62 / 192

pkgadd –d /dev/dsk/f0t
3. Press Enter.
4. When the message
Insert diskette into Floppy Drive 1
appears, press
Enter.
5. When the message
Installation of IBM ServeRAID SCSI IHV HBA (ips)
was successful
appears, type:
q
6. Press Enter.
7. After the device driver is installed, shut down and restart the server.
Installing an HBA diskette file using SCOAdmin:
1. Insert the IBM ServeRAID Device Drivers for SCO Operating Systems -
UnixWare HBA and OpenServer BTLD diskette into the diskette drive.
2. Start the SCOAdmin utility program by typing
SCOADMIN
at the system prompt.
3. Click Software_Management.
4. Click Application Installer.
5. Click the Install From tab.
6. Click Disk_A.
7. Click Update View if nothing appears in the window.
8. When the icon labeled ips appears in the window, click Install.
9. After the device driver is installed, remove the diskette from the diskette drive;
then, shut down and restart the server.
Step 5: Installing the ServeRAID Manager program and other utilities
The ServeRAID Manager program provides a graphical interface that you can use
to monitor ServeRAID configuration changes being performed on your server while
your server is fully operational. You can create an array, delete an array, create a
logical drive, change the RAID level, dynamically increase the logical drive size,
rebuild an array, configure your ServeRAID controllers in a failover environment,
configure a cluster, and perform other ServeRAID configuration functions.
48
IBM
®
Netfinity
®
User’s Reference: ServeRAID
™
-4H Ultra160 SCSI Controller