IBM Netfinity ServeRAID-4H Ultra160, User Reference

Page: 66 / 192

Installing on OpenServer
Note: This version of the ServeRAID Manager program supports up to 8
ServeRAID controllers when using OpenServer.
To install or remove the ServeRAID Manager package, you must have root
privileges.
Note: If ServeRAID Manager is installed on your system, you must remove this
version before upgrading. All customization files (such as Managed system
tree nodes, Notification list) are saved and used in the upgrade.
To remove the ServeRAID Manager program from OpenServer, type the
following command:
pkgrm RaidMan
To install the ServeRAID Manager program for OpenServer, do the following.
Note: The ServeRAID Manager requires that you install the SCO OpenServer JDK
(or JRE). You can download the JDK and JRE from the SCO Web site:
http://www.sco.com/java/
1. Insert the IBM ServeRAID Support CD into the CD-ROM drive.
2. Mount the CD-ROM by typing:
cd /
Then, press Enter.
mkdircdrom
Then, press Enter.
mount -r-f HS,lower/dev/cd0 /cdrom
Then, press Enter.
3. Then, type (all on the same line):
pkgadd -a /cdrom/programs/openserv/manager/RaidMan.adm -d
/cdrom/programs/openserv/manager/RaidMan.ds
4. Press Enter.
5. When the installation is complete, type:
umount /cdrom
6. Press Enter. You can now remove the CD from the CD-ROM drive.
Installing on UnixWare
Notes:
1. To use the ServeRAID Manager program with UnixWare, you must have either
the Java Runtime Environment (JRE) or the Java Development Kit (JDK)
installed on your server.
2. To install or remove the ServeRAID Manager package you must have root
privileges.
3. If the ServeRAID Manager program is already installed on your server, you must
remove this version before upgrading. All customization files (such as Managed
system tree nodes, Notification list) are saved and used in the upgrade. To
remove the ServeRAID Manager program from UnixWare, type the following
command:
52
IBM
®
Netfinity
®
User’s Reference: ServeRAID
™
-4H Ultra160 SCSI Controller