IBM Netfinity ServeRAID-4H Ultra160, User Reference

Page: 33 / 192

8. Secure the controller by either tightening the expansion-slot screw on the top
of the controller or closing the latch, depending on your server.
9. Connect the SCSI cables to the controller. If you intend to attach external
devices only, go to step 13 on page 20. Otherwise, continue with step 10
10. Connect one end of a 68-pin ANSI standard cable (separately purchased or
already in your server) to the internal channel connector on the ServeRAID
controller.
Note: See “Connector locations” on page 15 for the channel connector
locations.
2. ANSI stands for American National Standards Institute.
Figure 2. Inserting a ServeRAID-4H controller into the PCI expansion slot
Chapter 2. Installing and configuring ServeRAID controllers
19