IBM Netfinity ServeRAID-4H Ultra160, User Reference

Page: 115 / 192

Chapter 10. Monitoring and updating an IBM ServeRAID
Cluster Solution
You can use the ServeRAID Manager program to check the ownership of a physical
drive on another server or to add or remove a logical drive in the cluster. The
ServeRAID Manager program supports three features for cluster functions:
v
Validate cluster
v
Configure for clustering
v
View shared drives.
Note: Make sure that you installed the ServeRAID Manager program on your
server. If you need to install it, refer to “Installing the ServeRAID Manager
program” on page 49 for instructions.
Checking the ownership of a physical drive
A physical drive that is owned (and configured) on Server B will appear in the ready
or defunct state on Server A. To determine if a ready drive is owned by the other
server, do the following:
1. In the Main Tree, click the controller that contains the ready drives. A window
similar to the following opens.
Figure 26. Information mode window
© Copyright IBM Corp. 2000
101