MFP messages
225
Understanding the MFP control panel messages
53 Unformatted flash
detected
The MFP detects unformatted
flash memory.
Highlight
Continue
and press
✓
to clear
the message and continue printing. You
must format the flash memory before you
can store any resources on it.
If the error message reappears, the flash
memory may be defective and require
replacing.
54 Standard Network
Software Error
The MFP cannot establish
communications with an installed
network port.
Program new firmware for the network
interface by way of the USB port.
55 Unsupported Flash
in slot <X>
An unsupported flash option is
installed in the specified slot.
Remove the unsupported flash option
from the specified slot.
55 Unsupported Memory
in slot <X>
An unsupported memory option is
installed in the specified slot.
Remove the unsupported memory option
from the specified slot.
See the illustration on
for the
location of the slots.
56 Standard USB Port
Disabled
Data has been sent to the MFP
through a USB port, but the USB
port is disabled.
Make sure the USB Buffer menu item in
the USB Menu is not set to Disabled.
88 Toner is low
The print cartridge is low on toner.
To utilize the remaining toner, remove the
cartridge by gripping the handles with
both hands. With the cartridge arrows
pointing downward, shake the print
cartridge back and forth. Reinstall the
cartridge. You may notice reduced print
quality.
Replace the print cartridge.
900–999 Service
<message>
Messages 900–999 relate to
problems that may require service.
Turn the MFP off and check all cable
connections. Turn the MFP back on. If the
service message recurs, call for service
and report the message number and
description of the problem.
See also:
Administrator menus
turned off by system
administrator.
The support person has restricted
access to the administration
menus.
See your support person.
After pressing the
green start button the
fax will be
transmitted on
<send date> <send
time>
Continue
The fax job is queued at the time
displayed for delayed send.
Press Start to queue the fax job for
delayed sending.
Answering
The device is answering an
incoming fax.
No action required.
Message
What this message means
What you can do
Summary of Contents for Infoprint 1410
