IBM Infoprint 1410, User Manual

Page: 203 / 254

Menus
200
Using the MFP control panel and menus
Enable DHCP DHCP is Dynamic Host Configuration
Protocol. The network automatically
assigns a number for the network
information. On* The function is enabled.
Off The function is disabled.
Enable RARP RARP is Reverse Address Resolution
Protocol. On* The function is enabled.
Off The function is disabled.
Enable BOOTP BOOTP is Bootstrap Protocol. On* The function is enabled.
Off The function is disabled.
AutoIP Provides automatic IP. On*
Off
Enable FTP/TFTP Allows files to be transferred to the
device.
File Transfer Protocol (FTP) is the
protocol used on the Internet for
exchanging files. FTP uses the Internet
TCP/IP protocols to enable data transfer.
TFTP is Trivial File Transfer Protocol,
which is a simple form of FTP.
On* The function is enabled.
Off The function is disabled.
HTTP Server
Enabled Specifies if Web pages can be seen.
HyperText Transfer Protocol (HTTP), the
underlying protocol used by the World
Wide Web. HTTP defines how messages
are formatted and transmitted, and what
actions Web servers and browsers
should take in response to various
commands.
On* The function is enabled. Web
pages can be seen.
Off The function is disabled.
HTTP Config
Enabled Defines if settings can be changed in the
Configuration Link on the Web page. On* The function is enabled.
Off The function is disabled.
Network/USB – TCP/IP(continued)
Menu item Purpose Values and descriptions