IBM Flex System x440 Compute Node Installation And Service Manual Download Page 92

Page: 92 / 584

Severity:

Info

Alert Category:

System - Event Log Fullness

Serviceable:

CIM Information: Prefix:

IMM and

ID:

0037

SNMP Trap ID:

Automatically notify Support:

User response:

Information only; no action is required.

40000026-00000000

The [arg1] on system [arg2] is 100% full.

Explanation:

The IMM event log is full. New entries in the log will overwrite the oldest entries. To avoid losing

older log entries, save the log as a text file and clear the log.

May also be shown as 4000002600000000 or 0x4000002600000000

Severity:

Info

Alert Category:

System - Event Log Fullness

Serviceable:

CIM Information: Prefix:

IMM and

ID:

0038

SNMP Trap ID:

Automatically notify Support:

User response:

To avoid losing older log entries, save the log as a text file and clear the log.

40000027-00000000

Platform Watchdog Timer expired for [arg1].

Explanation:

A “Platform Watchdog Timer Expired” event has occurred.

May also be shown as 4000002700000000 or 0x4000002700000000

Severity:

Error

Alert Category:

System - OS Timeout

Serviceable:

CIM Information: Prefix:

IMM and

ID:

0039

SNMP Trap ID:

Automatically notify Support:

User response:

Complete the following steps until the problem is solved:

Reconfigure the watchdog timer to a higher value.

Make sure that the IMM Ethernet-over-USB interface is enabled.

Reinstall the RNDIS or cdc_ether device driver for the operating system.

Disable the watchdog.

Check the integrity of the installed operating system.

40000028-00000000

Management Controller Test Alert Generated by [arg1].

Explanation:

The Integrated Management Module has sent a test message to help verify connectivity.

May also be shown as 4000002800000000 or 0x4000002800000000

Severity:

Info

Alert Category:

System - other

Serviceable:

40000026-00000000 • 40000028-00000000

IBM Flex System x440 Compute Node Types 7917 and 2584: Installation and Service Guide

Summary of Contents for Flex System x440 Compute Node









































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Flex System x440 Compute Node

Reviews:

Related manuals for Flex System x440 Compute Node

Brands by name

Popular brands

IBM Flex System x440 Compute Node, Installation And Service Manual

Search results

Summary of Contents for Flex System x440 Compute Node

Reviews:

Related manuals for Flex System x440 Compute Node

Brands by name

Popular brands