IBM Flex System x440 Compute Node Installation And Service Manual Download Page 235

Page: 235 / 584

806f060d-0400ffff

Array [ComputerSystemElementName] has failed.

Explanation:

The Drive 0 is part of an RAID array that is in the failed condition. To identify drives in the failed

array all member drives will report this message.

May also be shown as 806f060d0400ffff or 0x806f060d0400ffff

Severity:

Error

Alert Category:

Critical - Hard Disk drive

Serviceable:

Yes

CIM Information: Prefix:

PLAT and

ID:

0176

SNMP Trap ID:

Automatically notify Support:

Yes

User response:

Replace the hard disk drives that are indicated by a lit status LED on the drive.

Recreate the array.

Restore data from backup.

806f060d-0401ffff

Array [ComputerSystemElementName] has failed.

Explanation:

The Drive 1 is part of an RAID array that is in the failed condition. To identify drives in the failed

array all member drives will report this message.

May also be shown as 806f060d0401ffff or 0x806f060d0401ffff

Severity:

Error

Alert Category:

Critical - Hard Disk drive

Serviceable:

Yes

CIM Information: Prefix:

PLAT and

ID:

0176

SNMP Trap ID:

Automatically notify Support:

Yes

User response:

Replace the hard disk drives that are indicated by a lit status LED on the drive.

Recreate the array.

Restore data from backup.

806f060d-0402ffff

Array [ComputerSystemElementName] has failed.

Explanation:

The Drive 2 is part of an RAID array that is in the failed condition. To identify drives in the failed

array all member drives will report this message.

May also be shown as 806f060d0402ffff or 0x806f060d0402ffff

Severity:

Error

Alert Category:

Critical - Hard Disk drive

Serviceable:

Yes

CIM Information: Prefix:

PLAT and

ID:

0176

SNMP Trap ID:

Automatically notify Support:

Yes

User response:

Replace the hard disk drives that are indicated by a lit status LED on the drive.

Recreate the array.

806f060d-0400ffff • 806f060d-0402ffff

Chapter 6. Troubleshooting

223

Summary of Contents for Flex System x440 Compute Node









































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Flex System x440 Compute Node

Reviews:

Related manuals for Flex System x440 Compute Node

Brands by name

Popular brands

IBM Flex System x440 Compute Node, Installation And Service Manual

Search results

Summary of Contents for Flex System x440 Compute Node

Reviews:

Related manuals for Flex System x440 Compute Node

Brands by name

Popular brands