IBM Flex System x440 Compute Node Installation And Service Manual Download Page 88

Page: 88 / 584

SNMP Trap ID:

Automatically notify Support:

User response:

Information only; no action is required.

40000019-00000000

LAN: Ethernet[[arg1]] interface is now active.

Explanation:

The IMM Ethernet interface has been enabled.

May also be shown as 4000001900000000 or 0x4000001900000000

Severity:

Info

Alert Category:

none

Serviceable:

CIM Information: Prefix:

IMM and

ID:

0025

SNMP Trap ID:

Automatically notify Support:

User response:

Information only; no action is required.

4000001a-00000000

DHCP setting changed to [arg1] by user [arg2].

Explanation:

The specified user has changed the DHCP setting of the Integrated Management Module external

network interface.

May also be shown as 4000001a00000000 or 0x4000001a00000000

Severity:

Info

Alert Category:

none

Serviceable:

CIM Information: Prefix:

IMM and

ID:

0026

SNMP Trap ID:

Automatically notify Support:

User response:

Information only; no action is required.

4000001b-00000000

Management Controller [arg1]: Configuration restored from a file by user [arg2].

Explanation:

The specified user has restored the Integrated Management Module (IMM) configuration from a

previously saved configuration file. Some configuration settings might require that the IMM be restarted before they
take effect.

May also be shown as 4000001b00000000 or 0x4000001b00000000

Severity:

Info

Alert Category:

none

Serviceable:

CIM Information: Prefix:

IMM and

ID:

0027

SNMP Trap ID:

Automatically notify Support:

User response:

Information only; no action is required.

40000019-00000000 • 4000001b-00000000

IBM Flex System x440 Compute Node Types 7917 and 2584: Installation and Service Guide

Summary of Contents for Flex System x440 Compute Node









































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Flex System x440 Compute Node

Reviews:

Related manuals for Flex System x440 Compute Node

Brands by name

Popular brands

IBM Flex System x440 Compute Node, Installation And Service Manual

Search results

Summary of Contents for Flex System x440 Compute Node

Reviews:

Related manuals for Flex System x440 Compute Node

Brands by name

Popular brands