IBM Flex System x440 Compute Node, Installation And Service Manual

Page: 453 / 584

User response: Information only; no action is required.
UEFI diagnostic codes
UEFI diagnostic codes can be generated when the compute node starts or while
the compute node is running. UEFI diagnostic codes are logged in the IMM event
log in the compute node.
For each event code, the following fields are displayed:
Event identifier
An identifier that uniquely identifies an event.
Event description
The logged message string that appears for an event.
Explanation
Additional information to explain why the event occurred.
Severity
An indication of the level of concern for the condition. In the event log, the
severity is abbreviated to the first character.
v
Info: The event was recorded for audit purposes, usually a user action
or a change of states that is normal behavior.
v
Warning: The event is not as severe as an error, but if possible, the
condition should be corrected before it becomes an error. It might also
be a condition that requires additional monitoring or maintenance.
v
Error: The event is a failure or critical condition that impairs service or
an expected function.
Alert Category
Similar events are grouped in categories. The alert category is in the
following format:
severity - device
severity is one of the following severity levels:
v
Critical: A key component in the server is no longer functioning.
v
Warning: The event might progress to a critical level.
v
System: The event is the result of a system error or a configuration
change.
device component is the specific device in the compute node that caused the
event to be generated.
User response
The actions that you should perform to resolve the event.
Perform the steps listed in this section in the order shown until the
problem is solved. After you perform all of the actions that are described
in this field, if you cannot solve the problem, contact IBM Support.
I.11002 [I.11002] A processor mismatch has been detected between one or more processors in the system.
Explanation:
One or More Mismatched Processors Detected
Severity: Info
User response: Complete the following steps:
1. This message could occur with messages about other Processor configuration problems. Resolve those messages
first.
I.11002
Chapter 6. Troubleshooting
441