IBM Flex System x440 Compute Node Installation And Service Manual Download Page 108

Page: 108 / 584

4000005e-00000000

SSH [arg1] by user [arg2].

Explanation:

The specified user has enabled or disabled the Secure Shell (SSH) service.

May also be shown as 4000005e00000000 or 0x4000005e00000000

Severity:

Info

Alert Category:

none

Serviceable:

CIM Information: Prefix:

IMM and

ID:

0094

SNMP Trap ID:

Automatically notify Support:

User response:

Information only; no action is required.

4000005f-00000000

Server timeouts set by user [arg1]: EnableOSWatchdog=[arg2], OSWatchdogTimout=[arg3],

EnableLoaderWatchdog=[arg4], LoaderTimeout=[arg5].

Explanation:

A user configures Server Timeouts

May also be shown as 4000005f00000000 or 0x4000005f00000000

Severity:

Info

Alert Category:

none

Serviceable:

CIM Information: Prefix:

IMM and

ID:

0095

SNMP Trap ID:

Automatically notify Support:

User response:

Information only; no action is required.

40000060-00000000

License key for [arg1] added by user [arg2].

Explanation:

A Integrated Management Module license that allows access to the specified feature was added to the

system.

May also be shown as 4000006000000000 or 0x4000006000000000

Severity:

Info

Alert Category:

none

Serviceable:

CIM Information: Prefix:

IMM and

ID:

0096

SNMP Trap ID:

Automatically notify Support:

User response:

Information only; no action is required.

40000061-00000000

License key for [arg1] removed by user [arg2].

Explanation:

The specified user has removed an Integrated Management Module license. Access to the specified

feature is no longer allowed.

May also be shown as 4000006100000000 or 0x4000006100000000

Severity:

Info

Alert Category:

none

Serviceable:

4000005e-00000000 • 40000061-00000000

IBM Flex System x440 Compute Node Types 7917 and 2584: Installation and Service Guide

Summary of Contents for Flex System x440 Compute Node









































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Flex System x440 Compute Node

Reviews:

Related manuals for Flex System x440 Compute Node

Brands by name

Popular brands

IBM Flex System x440 Compute Node, Installation And Service Manual

Search results

Summary of Contents for Flex System x440 Compute Node

Reviews:

Related manuals for Flex System x440 Compute Node

Brands by name

Popular brands