IBM Flex System x440 Compute Node Installation And Service Manual Download Page 70 | Manualshive

Page: 70 / 584

background image

v

If the fault LED is lit, it indicates that an error has occurred; view the light
path diagnostics panel and LEDs to isolate the failing component.

2.

To view the light path diagnostics LEDs, select one of the following procedures:

v

You can view the LEDs through the CMM

led

command, the CMM web

interface, or IBM Flex System Manager management software.
– For more information about the CMM

led

command, see the "IBM Flex

System Chassis Management Module: Command-Line Interface Reference
Guide" at http://ralfss21.raleigh.ibm.com:8099/help/topic/
com.ibm.acc.cmm.doc/cli_command_led.html.

– From the CMM web interface, select

Blade Servers

from the

Chassis

Management

menu. All fields and options are described in the CMM web

interface online help.

– For more information about IBM Flex System Manager management

software, see the "IBM Flex System Manager Software: Installation and
Service Guide" at http://ralfss21.raleigh.ibm.com:8099/help/topic/
com.ibm.acc.8731.doc/product_page.html.

v

If you are in the same location as the compute node, you can complete the
following steps:

a.

Remove the compute node from the IBM Flex System chassis, (see
“Removing a compute node from a chassis” on page 489 for instructions).

b.

Carefully lay the compute node on a flat, static-protective surface.

c.

Open the compute node cover (see “Removing the compute node cover”
on page 498 for instructions).

d.

Remove the air baffles that are installed over the DIMM connectors.

e.

Press the power button. When you press the power button, LEDs on the
light path diagnostics panel and the system board will be lit if there are
any hardware-related issues.

Note:

The power source for light path diagnostics is designed to last only

a short time. If you press the power button and the light path diagnostics
LED lights, light path diagnostics is charged to light the LEDs.

The following illustration shows the LEDs on the light path diagnostics panel.

The following illustration shows the locations of the light path diagnostics LEDs
on the system board.

58

IBM Flex System x440 Compute Node Types 7917 and 2584: Installation and Service Guide

«
...
68
69
70
71
72
...
»

Summary of Contents for Flex System x440 Compute Node









































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for Flex System x440 Compute Node

Brand: Gigabyte Pages: 2

Brand: IOGear Pages: 44

SuperServer 1019D-FRN8TP

Brand: Supermicro Pages: 126

PRIMERGY PG-RSBOP2

Brand: Fujitsu Pages: 68

SPARC Enterprise T5440 Server

Brand: Fujitsu Pages: 92

SPARC Enterprise T5140

Brand: Fujitsu Pages: 138

SPARC Enterprise T5440 Server

Brand: Fujitsu Pages: 214

SPARC Enterprise T5140

Brand: Fujitsu Pages: 130

Brand: Fujitsu Pages: 514

Brand: Inventec Pages: 129

SuperStorageSystem SSG-2028R-DN2R40L

Brand: Supermicro Pages: 84

Brand: Xerox Pages: 2

Brand: ICPDAS Pages: 30

Serial Servers Vlinx VESR9xx

Brand: Vlinx Pages: 65

Brand: 3onedata Pages: 3

Brand: Dell EMC Pages: 46

PowerEdge XE2420

Brand: Dell EMC Pages: 173

Brand: Lantronix Pages: 370

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands