IBM Flex System x440 Compute Node Installation And Service Manual Download Page 84

Page: 84 / 584

4000000b-00000000

IP address of default gateway modified from [arg1] to [arg2] by user [arg3].

Explanation:

The specified user has changed the gateway address of the Integrated Management Module external

network interface to the specified value.

May also be shown as 4000000b00000000 or 0x4000000b00000000

Severity:

Info

Alert Category:

none

Serviceable:

CIM Information: Prefix:

IMM and

ID:

0011

SNMP Trap ID:

Automatically notify Support:

User response:

Information only; no action is required.

4000000c-00000000

OS Watchdog response [arg1] by [arg2] .

Explanation:

This message is for the use case where an OS Watchdog has been enabled or disabled by a user.

May also be shown as 4000000c00000000 or 0x4000000c00000000

Severity:

Info

Alert Category:

none

Serviceable:

CIM Information: Prefix:

IMM and

ID:

0012

SNMP Trap ID:

Automatically notify Support:

User response:

Information only; no action is required.

4000000d-00000000

DHCP[[arg1]] failure, no IP address assigned.

Explanation:

A DHCP server has failed to assign an IP address to the IMM.

May also be shown as 4000000d00000000 or 0x4000000d00000000

Severity:

Warning

Alert Category:

none

Serviceable:

CIM Information: Prefix:

IMM and

ID:

0013

SNMP Trap ID:

Automatically notify Support:

User response:

Complete the following steps until the problem is solved:

Make sure that the IMM network cable is connected.

Make sure that there is a DHCP server on the network that can assign an IP address to the IMM.

4000000e-00000000

Remote Login Successful. Login ID: [arg1] from [arg2] at IP address [arg3].

Explanation:

The specified user has logged in to the Integrated Management Module.

May also be shown as 4000000e00000000 or 0x4000000e00000000

Severity:

Info

Alert Category:

System - Remote Login

4000000b-00000000 • 4000000e-00000000

IBM Flex System x440 Compute Node Types 7917 and 2584: Installation and Service Guide

Summary of Contents for Flex System x440 Compute Node









































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Flex System x440 Compute Node

Reviews:

Related manuals for Flex System x440 Compute Node

Brands by name

Popular brands

IBM Flex System x440 Compute Node, Installation And Service Manual

Search results

Summary of Contents for Flex System x440 Compute Node

Reviews:

Related manuals for Flex System x440 Compute Node

Brands by name

Popular brands