IBM Flex System x440 Compute Node Installation And Service Manual Download Page 311

Page: 311 / 584

SNMP Trap ID:

Automatically notify Support:

User response:

Information only; no action is required.

81070301-0301ffff

Sensor CPU 1 Overtemp has deasserted the transition to non-recoverable from a less severe

state.

Explanation:

The previously high microprocessor 1 temperature has returned to below its specified threshold.

May also be shown as 810703010301ffff or 0x810703010301ffff

Severity:

Info

Alert Category:

Critical - Temperature

Serviceable:

CIM Information: Prefix:

PLAT and

ID:

0525

SNMP Trap ID:

Automatically notify Support:

User response:

Information only; no action is required.

81070301-0302ffff

Sensor CPU 2 Overtemp has deasserted the transition to non-recoverable from a less severe

state.

Explanation:

The previously high microprocessor 2 temperature has returned to below its specified threshold.

May also be shown as 810703010302ffff or 0x810703010302ffff

Severity:

Info

Alert Category:

Critical - Temperature

Serviceable:

CIM Information: Prefix:

PLAT and

ID:

0525

SNMP Trap ID:

Automatically notify Support:

User response:

Information only; no action is required.

81070301-0303ffff

Sensor CPU 3 Overtemp has deasserted the transition to non-recoverable from a less severe

state.

Explanation:

The previously high microprocessor 3 temperature has returned to below its specified threshold.

May also be shown as 810703010303ffff or 0x810703010303ffff

Severity:

Info

Alert Category:

Critical - Temperature

Serviceable:

CIM Information: Prefix:

PLAT and

ID:

0525

SNMP Trap ID:

Automatically notify Support:

User response:

Information only; no action is required.

81070301-0301ffff • 81070301-0303ffff

Chapter 6. Troubleshooting

299

Summary of Contents for Flex System x440 Compute Node









































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Flex System x440 Compute Node

Reviews:

Related manuals for Flex System x440 Compute Node

Brands by name

Popular brands

IBM Flex System x440 Compute Node, Installation And Service Manual

Search results

Summary of Contents for Flex System x440 Compute Node

Reviews:

Related manuals for Flex System x440 Compute Node

Brands by name

Popular brands