Storage
DS4700
Storage
Subsystem
Installation,
User's,
and
Maintenance
Guide
,
or the
IBM
System
Storage
DS4800
Storage
Subsystem
Installation,
User's,
and
Maintenance
Guide
.
Intermixing
EXP810s
with
EXP710s
and
EXP810s
in
a
DS4700
or
DS4800
configuration
When intermixing EXP100s, EXP710s, and EXP810s in a DS4700 or DS4800
storage subsystem configuration, if it is not possible to cable each group of
enclosures by model type (EXP100s, EXP710s, and EXP810s) in a separate
redundant drive loop pair or behind each port of the dual-ported redundant drive
channel pair, group them so that EXP810s are between EXP100s and EXP710s.
In addition, when an EXP100 is the first storage expansion enclosure cabled
directly to the storage subsystem's controller drive port, follow these rules:
v
Cable from the storage subsystem controller drive port to the OUT port on the
left ESM (ESM A) of the EXP100.
Note:
This is a change from previous cabling recommendations where you
cabled from the controller drive port to the IN port on the left ESM (ESM
A) of the EXP100.
v
If an EXP100 follows the initial EXP100, cable from the IN port on the left ESM
(ESM A) of the first EXP100 to the OUT port on the left ESM of the next
EXP100. Continue this cabling pattern until you encounter an EXP710 or
EXP810, then cable from the IN port on the left ESM (ESM A) of the EXP100 to
the IN port of the EXP710 or EXP810.
v
If an EXP710 or EXP810 follows the initial EXP100, cable from the IN port on the
left ESM (ESM A) of the EXP100 to the IN port of the EXP710 or EXP810. To
cable to the next storage expansion enclosure in the chain, cable from the OUT
port of the left ESM of the EXP710 or EXP810 to the IN port of the next storage
expansion enclosure.
v
Continue the left ESM (ESM A) cabling pattern by cabling from the OUT port to
the IN port on subsequent storage expansion enclosures until you complete the
chain.
Figure 37 on page 61 shows an acceptable EXP710, EXP810 and EXP100 intermix
configuration in a DS4700 or DS4800 environment. The cabling is acceptable
because it follows the cabling recommendations.
60
IBM System Storage DS4000 EXP810 Storage Expansion Enclosure: Installation, User’s and Maintenance Guide
Summary of Contents for DS4000 EXP810
Page 2: ......
Page 67: ...ds470067 Figure 20 Installing a bezel Chapter 2 Installing the EXP810 39...
Page 229: ......
Page 230: ...Printed in USA GC26 7798 09...