Firmware
Version
06.19.xx.xx
package for the DS4500 or the DS4300
dual-controller Standard and Turbo models.
4. Click
Yes
when the Confirm Download window opens. The Confirm Download
window closes and the Downloading window opens and shows the status of
the firmware download.
5. One of following two windows displays:
v
If you receive the message
NVSRAM download successful
displayed in the
Downloading window, click
Done
to close the Downloading window and then
continue with step 6.
v
If you see an error window displaying a
Controller Download Timeout
error,
power off and then power on the DS4000. Then verify that the NVSRAM
was downloaded correctly to controller B of the storage subsystem.
To verify that the correct NVSRAM version was downloaded, click
Storage
Subsystem
→
View
→
Profile
. In the Storage Subsystem Profile window,
look for the correct NVSRAM file version under the All tab.
– If the NVSRAM was downloaded correctly, continue with step 6.
– If the NVSRAM was not downloaded correctly, try the NVSRAM
download again. If the problem persists after the second NVSRAM file
download, call your IBM technical support representative.
6. Click
Done
to close the Downloading window.
7. Click
Advanced
→
Maintenance
→
Download
→
Controller
Firmware
. The
Firmware Download window opens.
Note:
The firmware version must be 06.16.xx.xx or higher. The firmware files
are located in the appropriate DS4000 storage subsystem directory in
the \FIRMWARE directory of the Web downloaded
DS4000
Storage
Subsystem
Controller
Firmware
Version
06.16.xx.xx
package for the
DS4700 or the DS4800 subsystems or
DS4000
Storage
Subsystem
Controller
Firmware
Version
06.19.xx.xx
package for the DS4500 or the
DS4300 dual-controller Standard and Turbo models. You must upgrade
the controller B firmware to the version on the CD and synchronize the
firmware with controller A before you can download the newer version of
the controller firmware on the DS4000 Support Web site:
www.ibm.com/servers/storage/support/disk/
8. Select the directory that contains the controller firmware file, then select the
name of the controller firmware file. Click
OK
to close the window an continue.
9. Click
Yes
when the Confirm Download window opens. The Confirm Download
window closes and the Downloading window opens and shows the status of
the firmware download.
10. One of two windows displays:
v
If you receive the message
Firmware download is successful
in the
Downloading window and the New Firmware Detected window displays,
then continue with step 11 on page 140.
v
If you see an error window displaying a
Controller Download Timeout
error,
power off and then power on the DS4000. Verify that the firmware was
downloaded correctly to controller B of the storage subsystem.
To verify that the correct firmware version was downloaded, perform the
following steps:
a. Right-click the controller B icon in the Physical pane of the Subsystem
Management window and select
Properties
.
Appendix A. Upgrading the DS4000 controller firmware
139
Summary of Contents for DS4000 EXP810
Page 2: ......
Page 67: ...ds470067 Figure 20 Installing a bezel Chapter 2 Installing the EXP810 39...
Page 229: ......
Page 230: ...Printed in USA GC26 7798 09...
