Appendix
C.
Rack
mounting
template
This appendix provides duplicate copies of the rack mounting templates. If you want
to tear out the templates from this document for easier use, use these copies rather
than those provided in “Installing the support rails” on page 32.
Use the following templates (Figure 63 on page 152 and Figure 64 on page 153) to
identify the proper locations for inserting M5 screws when mounting the support
rails and EXP810 to a rack. The locations for the M5 screws are highlighted in the
templates.
The EXP810 is 3 U high. Align the template with the rack at a U boundary. U
boundaries are shown as horizontal dashed lines in the rack mounting templates.
Note:
The mounting holes that are shown in the following templates are square.
The holes in your rack might be round or square.
© Copyright IBM Corp. 2006, 2009
151
Summary of Contents for DS4000 EXP810
Page 2: ......
Page 67: ...ds470067 Figure 20 Installing a bezel Chapter 2 Installing the EXP810 39...
Page 229: ......
Page 230: ...Printed in USA GC26 7798 09...
