IBM 7383, Installation And Service Manual

Page: 465 / 488

Table 39. IMM error messages (continued)
v
Follow the suggested actions in the order in which they are listed in the Action column until the problem is
solved.
v
If an action step is preceded by “(Trained technician only)”, that step must be performed only by a trained
technician.
40000022-00000000 SSL data in the IMM
configuration data is
invalid. Clearing
configuration data
region and disabling
SSL+H25. Error There is a problem
with the certificate
that has been
imported into the
IMM. The
imported certificate
must contain a
public key that
corresponds to the
key pair that was
previously
generated through
the
Generate a
New Key and
Certificate Signing
Request
link.
1. Make sure that the certificate that
you are importing is correct.
2. Try to import the certificate again.
40000023-00000000 Flash of %1 from %2
succeeded for user
%3. (%1 =
CIM_ManagedElement.ElementName;
%2 = Web or
LegacyCLI; %3 =
user ID) Info A user has
successfully
updated one of the
following firmware
components:
v
IMM main
application
v IMM boot ROM
v Server firmware
(UEFI)
v
Diagnostics
v
System power
backplane
v
Remote
expansion
enclosure power
backplane
v
Integrated
service processor
v
Remote
expansion
enclosure
processor
No action; information only.
40000024-00000000 Flash of %1 from %2
failed for user %3.
(%1 =
CIM_ManagedElement.ElementName;
%2 = Web or
LegacyCLI; %3 =
user ID) Info An attempt to
update a firmware
component from
the interface and IP
address has failed. Try to update the firmware again.
Appendix C. Integrated management module II (IMM2) error messages
447