IBM 7383 Installation And Service Manual Download Page 168

Page: 168 / 488

Diagnostic text messages

Diagnostic text messages are displayed while the tests are running.

A diagnostic text message contains one of the following results:

Passed:

The test was completed without any errors.

Failed:

The test detected an error.

Aborted:

The test could not proceed because of the server configuration

Additional information concerning test failures is available in the extended
diagnostic results for each test.

Viewing the test log results and transferring the DSA collection

Use this information to view the test log results and transferring the DSA
collection.

About this task

To view the test log for the results when the tests are completed, click the

Success

link in the Status column, if you are running the DSA graphical user interface, or
type

to exit the Execute Tests menu, if you are running the DSA interactive

menu, or select

Diagnostic Event Log

in the graphical user interface. To transfer

DSA Preboot collections to an external USB device, type the

copy

command in the

DSA interactive menu.

Procedure

If you are running the DSA graphical user interface (GUI), click the

Success

link

in the Status column.

If you are running the DSA interactive menu (CLI), type

to exit the Execute

Tests menu; then, select

completed tests

to view the results.

Results

You can also send the DSA error log to IBM support to aid in diagnosing the
server problems.

Automated service request (call home)

IBM provides tools that can automatically collect and send data or call IBM
Support when an error is detected.

These tools can help IBM Support speed up the process of diagnosing problems.
The following sections provide information about the call home tools.

150

System x3500 M4 Type 7383: Installation and Service Guide

Summary of Contents for 7383









































































































































































































































































































































































































































































































Search results

Summary of Contents for 7383

Reviews:

Related manuals for 7383

Brands by name

Popular brands

IBM 7383, Installation And Service Manual

Search results

Summary of Contents for 7383

Reviews:

Related manuals for 7383

Brands by name

Popular brands