IBM 7383, Installation And Service Manual

Page: 201 / 488

Chapter 6. Removing and replacing components
Use this information to remove and replace the server components.
The types of replaceable components are:
v
Structural parts: Purchase and replacement of structural parts (components, such
as chassis assembly, top cover, and bezel) is your responsibility. If IBM acquires
or installs a structural component at your request, you will be charged for the
service.
v Tier 1 customer replaceable unit (CRU):
Replacement of Tier 1 CRUs is your
responsibility. If IBM installs a Tier 1 CRU at your request, you will be charged
for the installation.
v
Tier 2 customer replaceable unit: You may install a Tier 2 CRU yourself or
request IBM to install it, at no additional charge, under the type of warranty
service that is designated for your server.
See Chapter 5, “Parts listing, IBM System x3500 M4 Type 7383,” on page 173 to
determine whether a component is a structural part, Tier 1 CRU, or Tier 2 CRU.
For information about the terms of the warranty, see the Warranty Information
document that comes with the server.
For more information about getting service and assistance, see Appendix D,
“Getting help and technical assistance,” on page 449.
Returning a device or component
If you are instructed to return a device or component, follow all packaging
instructions, and use any packaging materials for shipping that are supplied to
you.
Opening the bezel media door
Use this information to unlock the left-side cover to open or remove the bezel.
Before you begin
Read the safety information in “Safety” on page vii and “Installation guidelines”
on page 34.
About this task
To open the media door, complete the following steps.
Procedure
1. Check the status of the media door icon. If the icon on the side of the bezel is
in the unlocked position, open the bezel media door directly.
© Copyright IBM Corp. 2013
183