IBM 6H0, Service Manual

Page: 234 / 561

Table 6. Service Processor Error Codes. (continued)
Error Code Description Action/
Possible Failing FRU
4066 00A6 Scan interface basic assurance tests
detected no usable memory
1. Ensure that memory DIMMS and
cards are properly installed
2. Go to service processor Memory
Configuration/Deconfiguration
menu to verify memory DIMMs
state. See
″
Memory
Configuration/Deconfiguration
Menu
″
on page 384 for more
information.
3. Go to “MAP 1540: Minimum
Configuration” on page 113.
4066 00A7 Scan interface basic assurance tests
detected hardware problem
Go to “MAP 1540: Minimum
Configuration” on page 113.
4066 00B0 Scan interface basic assurance tests
detected bus controller lock-unlock
failure
RIO adapter
Location: U0.1-P1.1
4066 00B1 Scan interface basic assurance tests
detected bus controller failure
RIO adapter
Location: U0.1-P1.1
4066 00B7 Scan interface basic assurance tests
detected insufficient hardware
resources to continue IPL
This error code appears after the
initial testing by the service processor
firmware on the CEC was completed
correctly, but a problem occurred
when the firmware tried to
communicate outside the CEC.
Suspect a problem with the RIO
interface, either cables or adapters.
4066 0100 Scan interface basic assurance tests
detected memory riser card fault
Memory riser card
Location: U1.1-P1-M2
4066 0101 Scan interface basic assurance tests
detected memory DIMM fault
Memory DIMM
Location: U1.1-P1-M2.15
4066 0102 Scan interface basic assurance tests
detected memory DIMM fault
Memory DIMM
Location: U1.1-P1-M2.1
4066 0103 Scan interface basic assurance tests
detected memory DIMM fault
Memory DIMM
Location: U1.1-P1-M2.16
4066 0104 Scan interface basic assurance tests
detected memory DIMM fault
Memory DIMM
Location: U1.1-P1-M2.2
4066 010D Scan interface basic assurance tests
detected memory DIMM fault
Memory DIMM
Location: U1.1-P1-M2.1 x4
4066 0111 Scan interface basic assurance tests
detected memory DIMM fault
Memory DIMM
Location: U1.1-P1-M2.13
4066 0112 Scan interface basic assurance tests
detected memory DIMM fault
Memory DIMM
Location: U1.1-P1-M2.3
4066 0113 Scan interface basic assurance tests
detected memory DIMM fault
Memory DIMM
Location: U1.1-P1-M2.14
214
Service Guide