IBM 6H0, Service Manual

Page: 267 / 561

Table 6. Service Processor Error Codes. (continued)
Error Code Description Action/
Possible Failing FRU
406B 0331 Wire test detected memory DIMM
fault
Memory DIMM
Location: U1.1-P1-C1-M5
406B 0332 Wire test detected memory DIMM
fault
Memory DIMM
Location: U1.1-P1-C1-M4
406B 033D Wire test detected memory DIMM
fault
Memory DIMM
Location: U1.1-P1-C1-M4 x2
406B 03FF Wire test detected memory on
processor card fault
Memory failure on processor card
that cannot be automatically isolated.
Go to “MAP 1540: Minimum
Configuration” on page 113, and run
CEC drawer minimum configuration
for further isolation.
406B 3101 Wire test detected RIO port 0 fault 1. Processor card
Location: U1.1-P1-C1
2. CEC drawer backplane
Location: U1.1-P1
406B 3102 Wire test detected RIO port 1 fault 1. Processor card
Location: U1.1-P1-C1
2. CEC drawer backplane
Location: U1.1-P1
406B 3121 Wire test detected RIO cable on port
0 fault
RIO cable on port 0
Location: U1.1-P1/Q3
406B 3122 Wire test detected RIO cable on port
1 fault
RIO cable on port 1
Location: U1.1-P1/Q2
406B 31FF Wire test detected RIO port fault Processor card
Location: U1.1-P1-C1
406B 3200 Wire test detected primary I/O drawer
fault
Go to “MAP 1540: Minimum
Configuration” on page 113.
406B 3201 Wire test detected primary I/O
backplane fault
Primary I/O backplane
Location: U0.1-P1
406B 3280 Wire test detected primary RIO
adapter fault
Primary RIO adapter
Location: U0.1-P1.1
406B 3281 Wire test detected primary RIO port 0
fault
1. Check RIO cable
Location: U0.1-P1.1/Q1
2. Primary RIO adapter
Location: U0.1-P1.1
406B 3282 Wire test detected primary RIO port 1
fault
1. Check RIO cable
Location: U0.1-P1.1/Q2
2. Primary RIO adapter
Location: U0.1-P1.1
406B 3283 Wire test detected primary RIO ports
fault
Primary RIO adapter
Location: U0.1-P1.1
Chapter 5. Error Code to FRU Index
247