IBM 2220 Nways 300, Service Manual

Page: 82 / 264

How to Remove a Line or Trunk Cable
Important
Before removing a line or trunk cable attached to an active LIC, lock the
corresponding line or trunk using the following procedure.
The following procedure is an example of how to Lock a Line. The window
contents may be different on your screen.
When the Nways Switch administration station is powered ON and initialized the
Nways Switch Desktop window is displayed.
1. Click on the Nways Switch Services icon.
2. In the Nways Switch Services window, click on the Nways Switch Resource
Control (Local) icon.
3. In the Nways Switch Resource Control window, using the left or bottom
button on the mouse, click on the Line that you want to lock. Then using the
right or top button on the mouse, click again on the resource.
4. The following window is displayed. Click on the Lock option.
3-24
2220 Models 300, 500, and 501: Service Guide