IBM 2220 Nways 300, Service Manual

Page: 17 / 264

The standard connecting arrangement code for this equipment is:
Connector type 8-position miniature
Connector model RJ48C
Cable length
30 m (98 ft) maximum
R.E.N Not applicable.
LIC544
The standard connecting arrangement code for this equipment are:
Connector type 8-position miniature
Connector model Not Applicable
Cable length
30 m (98 ft) maximum
R.E.N Not applicable
or,
Connector type 15-position
Connector model DB15F
Cable length
30 m (98 ft) maximum
R.E.N Not applicable
Facility Interface Code Service Order Code Module type
04DU9-BN 6.0P LIC544
04DU9-DN 6.0P LIC544
04DU9-1KN 6.0P LIC544
04DU9-1SN 6.0P LIC544
Notice to Users of Machines Installed in Canada
The Industry Canada label identifies certified equipment. This certification means
that the equipment meets certain telecommunications network protective,
operational and safety requirements as prescribed in the appropriate Terminal
Equipment Technical Requirements document(s). The Department does not
guarantee the equipement will operate to the user's satisfaction.
Before installing this equipment, users should ensure that it is permissible to be
connected to the facilities of the local telecommunications company. The equipment
must also be installed using an acceptable method of connection. The customer
should be aware that compliance with the above conditions may not prevent
degradation of service in some situations.
Repairs to certified equipment should be coordinated by a representative
designated by the supplier. Any repairs or alterations made by the user to this
equipment, or equipment malfunctions, may give the telecommunications company
cause to request the user to disconnect the equipment.
Users should ensure for their own protection that the electrical ground connections
of the power utility, telephone lines and internal metallic water pipe system, if
present, are connected together. This precaution may be particularly important in
rural areas.
Notices
xv