IBM 2220 Nways 300, Service Manual

Page: 189 / 264

After Exchanging a Switch or Switch Redrive
You have two switch or Switch redrive modules installed on your machine and before exchanging the
suspected the module you have set the Set Switchover Options to Inhibit.
1. On the Nways Switch administration station, locate the icon of the Switch module that have you
exchanged, or the associated Switch icon of the Switch redrive module that you have exchanged.
2. On the Switch icon, click on the left or bottom mouse button, then on the right or top mouse button. A
popup menu is displayed.
3. Click on the Set Switchover Options. On the displayed window, set the Authorize option then click
on the OK button.
4. Go to “Ending the Exchange Procedure” on page 6-75.
Chapter 6. 2220 FRU Exchange
6-71