ibidi Pump System
Figure 24: Insert the tubing coming from reservoir A into the left side slots. The
marked tubing goes in the rear slot.
6. Check the correct position of the tubing in the openings of the pinch valve (Figure
Figure 25: Top view (left) and side view (right) of properly mounted tubing in the
pinch valve.
Handling Tips:
For easy mounting, stretch the tubing and move it up and down. Stretch the tubing only between
the y-connectors to ensure the tubing is not disconnected (Figure
Verify that the Perfusion Set is mounted correctly. Check that the tubes are inserted such that
the pinching bolt is closing the full diameter of the tubes by performing the pinch test with each
mounted Perfusion Set (Section
Important!
The pinch valve must never come in contact with liquid. If medium or any other liquid comes in
contact with the pinch valve, proper function is no longer guaranteed.
Version 2.6 (May 12, 2022)
40
Instruction Manual
