ibidi ibidi Pump System, Instruction Manual

Page: 39 / 80

ibidi Pump System
Figure 20: Screw the adapters tight
into the reservoirs. Figure 21: Secure the Luer adapters in the
Female Luer Coupler.
3. Insert the reservoirs into the holder. The reservoir connected to the tubing with the extra red
marking (reservoir B) must be inserted into the right side of the holder (viewed from the front).
Slightly squeeze the reservoirs for easy insertion (Figure
22 ).
4. Begin with the valve’s right side slots. Insert the two sections of the tubing coming from reser-
voir B into these slots (Figure 23 ).
5. Perform the same procedure for the slots on the
left side
(Figure 24 ).
Figure 22: Squeeze the reservoirs for insertion into the holder.
Figure 23: Insert the tubing coming from reservoir B into the right side slots. The
marked tubing goes in the rear slot.
Instruction Manual 39 Version 2.6 (May 12, 2022)