ibidi Pump System
Figure 26: Move the tubing up and down while stretching for easy placement into the valve slots.
6.3
Filling the Perfusion Set with Medium
To maintain sterility inside the Perfusion Set, do not disconnect any tubing adapter or reservoir filter
outside the laminar flow hood.
1. The Fluidic Unit with the mounted Perfu-
sion Set must be placed in a laminar flow
hood.
2. First connect the air pressure tubing to the
reservoir filters (Figure
) and then pull off
both filters from the syringe.
3. Fill in the required amount of medium ap-
propriate for the Perfusion Set being used
(Figure
). The correct amount of medium
is indicated in table
on page
4. Put the filters back on the syringes and
place the Fluidic Unit back in the incubator.
5. Proceed with removing the air bubbles
(Section
Figure 27: Connect the filters of the Perfu-
sion Set to the Fluidic Unit tubing.
Instruction Manual
41
Version 2.6 (May 12, 2022)
