I/O TC5000, User Manual

Page: 125 / 149

Troubleshooting
0000
9
The Help key was pressed. Either no error code was
displayed, or the error was issued by a program that does
not support the Help key.
Press RESET and continue entering information, or refer to
previous error and perform action required.
0001
9
The host or remote workstation control unit is slower than
the keystrokes entered. The last character you entered
was not recognized.
Press RESET and continue entering data.
0002
9
The host system or remote workstation control unite
received an invalid key code.
Press RESET and continue entering data. If the error still
occurs, report the problem to your system administrator.
0003
9
You pressed an invalid key after pressing and hold the
<Alt> key.
Press RESET.
0004
9
Your attempted to enter data into a field that does not allow
keyboard input.
Press RESET
.
0005
9
You attempted to enter data when the cursor was not in an
input field. Data cannot be entered in a protected area of
the display.
9
Press RESET. Move the cursor to a valid input field.
0006
9
After pressing the SysReq/Attn key, and before pressing
the <Enter> key or the RESET key, you pressed an invalid
key.
Press RESET.
0007
9
At least one field on the display requires that you enter data
before the display can be changed or moved. (The cursor
goes to the first character position of the first mandatory-
entry field.)
Press RESET and enter the required data.
0008
9
Non-alphabetic data was attempted to be entered into an
alphabetic field. Valid characters are A-Z, a blank, a
comma, a period, and a hyphen.
Press RESET and use valid characters.
Thin Client User’s Guide 125