I/O TC5000 User Manual Download

Page: 64 / 149

Using Connections

Click

Next>

to continue.

6. On the General Preferences screen, complete the following. Then click

Next>

to continue.

Disconnect service…:

Check this option to automatically disconnect from the server upon

completion of all pending actions. This option most effectively utilizes connection time and
bandwidth.

Check for new mail…:

Check this option to have the thin client check for new mail periodically.

Enter the desired amount of time to wait until the e-mail server is checked for new mail.

Display a message box…:

(POP3 option) Check this option to be informed when new mail is

received.

Play a sound:

(IMAP4 option) Check this option to be informed when new mail is received.

Send using…:

(POP3 option) Check this option to send mail using the MIME format (messages

are sent with extended characters).

Only display messages…:

Check this option if you want to specify the number of days in the past

that will be downloaded when a connection is made to the e-mail server. Messages on the e-mail
server older than this selection will not be downloaded.

Click

Next>

to continue.

7. On the Inbox Preferences screen, complete the following. . Then click

Next>

to continue.

Thin Client User’s Guide

Summary of Contents for TC5000






















































































































































Search results

Summary of Contents for TC5000

Reviews:

Related manuals for TC5000

Brands by name

Popular brands

I/O TC5000, User Manual

Search results

Summary of Contents for TC5000

Reviews:

Related manuals for TC5000

Brands by name

Popular brands