I/O TC5000 User Manual Download Page 15

Page: 15 / 149

Setup the Thin Client

Right click

on the

PCI-VT30651

icon and select Properties.

Select the

IP Address

tab.

Select

Specify an IP address

. Then manually enter the IP Address, the subnet mask and default

gateway.

If there are DNS or WINS servers in the network, select the Name Servers tab. Otherwise, click the

button on the title line of this screen, then click the close button (the

in the upper right corner). Click

Next

>to continue.

Name Servers

If there are DNS or WINS servers in the network, select the Name Servers tab.

Fill in the appropriate IP address for each server.

Click the

button on the title line of this screen, then click the close button (the

in the upper right

corner). Click

Next

>to continue.

Step Three: Desktop Settings

You will configure the monitor resolution, color pallel and screen saver settings on this screen.

Thin Client User’s Guide

Summary of Contents for TC5000






















































































































































Search results

Summary of Contents for TC5000

Reviews:

I/O TC5000, User Manual, Page: 15 / 149

Search results

Summary of Contents for TC5000

Reviews: