I/O TC5000 User Manual Download Page 42

Page: 42 / 149

Creating Connections

Microsoft Viewers

The thin client contains five viewers for files created in the following formats:

Word

Excel

PowerPoint

Image

Acrobat

PDF

When using the Internet Explorer browser or viewing an e-mail attachment, viewers are automatically
loaded.

Before documents located on a USB storage device or a shared network drive (through Windows
terminal services or Citrix) can be viewed, a viewer connection must be created.

F YOU WILL NOT BE VIEWING FILES OTHER THAN WITHIN A BROWSER CONNECTION OR AS AN E

MAIL

ATTACHMENT

THERE IS NO NEED TO ADD CONNECTIONS FOR THE VIEWERS

1. Click

the

Configure

tab in the

Terminal Connection Manager

then click the

Add

button to display

the

New Connection

dialog box.

2. Select the desired viewer and click

. A viewer entry will appear in the connections listing.

Thin Client User’s Guide

Summary of Contents for TC5000






















































































































































Search results

Summary of Contents for TC5000

Reviews:

I/O TC5000, User Manual, Page: 42 / 149

Search results

Summary of Contents for TC5000

Reviews: