I/O TC5000, User Manual

Page: 127 / 149

Troubleshooting
0017
9
Field -, Field +, or the Field Exit key have been pressed,
but the requirements for this field have not been net. You
must fill this field completely or exit the first position of the
field.
Press RESET and enter data to the end of field or move
the cursor to the start of the field and use one of the field
keys to blank out the field.
0018
9
A data key was used instead of a non-data key.
Press RESET and use a non-data key such as a FIELD
EXIT key or an arrow key to leave this field.
0019
9
The Dup key was pressed, and is not permitted in this field.
Press RESET and continue.
0020
9
An invalid key was pressed.
Press RESET and continue by pressing the FIELD +,
FIELD -, or FIELD EXIT key.
0021
9
The cursor is positioned in a mandatory enter field. Data
must be entered before you can exit the field by pressing
the Field -, Field +, or Field Exit key.
Press RESET and enter the required data.
0022
9
A system error occurred when using the Insert or Delete
key.
Press RESET. Verify if the insert or delete function was
done properly. If not, correct the field.
0023
9
The Hex key was pressed, but the keys following were not
A-F, or 0-9. This error also occurs when a hexadecimal
code is used in a numeric-only, signed numeric, alpha only,
or feature I/O field.
Press RESET and continue.
0024
9
A non-numeric value was entered in a numeric-only field.
Press RESET and continue.
0026
9
The Field – key was pressed to exit a numeric-only field,
but last position of the field is not numeric.
Press RESET and correct the last position of the field.
Thin Client User’s Guide 127