I/O TC5000 User Manual Download Page 16

Page: 16 / 149

Setup the Thin Client

Desktop Area and Refresh Frequency

By default, the thin client is configured to display at a resolution of 800 x 600 and a refresh frequency of
75Hz.

Select the resolution and refresh rate appropriate for your monitor.

OTE

N GENERAL

CRT

MONITORS CAN HANDLE A RANGE OF RESOLUTIONS AND REFRESH RATES

OWEVER

LCD

MONITORS PREFER THE RESOLUTION AND REFRESH RATE TO BE SET TO MATCH THEIR

“

NATIVE

”

RESOLUTION

ENERALLY THIS IS

1024

728

Z FOR

15”

LCD

MONITORS

AND

1280

1024

Z FOR

17”

LCD

MONITORS

If you select a resolution or refresh frequency other than the default setting, verify whether your monitor
supports the selected setting by clicking the Test button.

The following prompt is displayed.

Click

to continue. A test pattern of black and white boxes will be displayed for about five seconds.

OTE

ONITORS WITH

CREEN

ISPLAY

(OSD)

FEATURE MAY DISPLAY APPROPRIATE MESSAGES

(

SUCH AS

‘O

UT OF

YNC

’

‘O

UT OF

ANGE

’

)

IF THE SELECTED RESOLUTION AND FREQUENCY ARE

NOT SUPPORTED

HE EXACT TEXT OF THE

OSD

MESSAGE WOULD DEPEND ON THE MODEL OF THE

MONITOR CONNECTED TO THE THIN CLIENT

Thin Client User’s Guide

Summary of Contents for TC5000






















































































































































Search results

Summary of Contents for TC5000

Reviews:

I/O TC5000, User Manual, Page: 16 / 149

Search results

Summary of Contents for TC5000

Reviews: