![background image](http://html1.mh-extra.com/html/hyundai/r35z-7/r35z-7_workshop-manual_2196159384.webp)
7-124
4
Metal
Press here
(Straight down)
Push bar
6
Right
Wrong
Rod seal(6) has its own fitting direction.
Therefore, confirm it before fitting them.
Fitting rod seal(6) upside down may
damage its lip. Therefore check the
correct direction that is shown in fig.
ö
ö
Fit back up ring(7), rod seal(6) to
corresponding grooves, in that order.
Coat each packing with hydraulic oil
before fitting it.
Insert the backup ring until one side of it
is inserted into groove.
Κ
ö
ö
Coat dust wiper(4) with grease and fit
dust wiper(4) to the bottom of the hole of
dust seal.
At this time, press a pad metal to the
metal ring of dust seal.
Fit retain ring(5) to the stop face.
Θ
Ι
A
A
SSEMBLY
Assemble cylinder head assembly
Check for scratches or rough surfaces if
found smooth with an oil stone.
Coat the inner face of gland(3) with
hydraulic oil.
(1)
4)
ö
Η
R5577CY38
R35Z77CY29
8-157(3) 210-7
R35Z77CY35