7-59
While paying attention to the location of
the pin (2-25), install the cover (2-21) and
other associated parts to the case (2-1).
Exercise care so that the pin (2-25) and
the valve plate (2-24) will not fall.
2-27
2-21
§
ö
R35Z77SM02
Loosely tighten the socket head bolts (2-
27), then using a torque wrench, tighten
them to the specified torque.
Â
Tightening torque : 13
Ü
0.7 kgf
Â
m
(94.4
Ü
5 lbf
Â
ft)
§
A
A
ssembling the reduction gear
Press-fit the oil seal (1-7).
Prior to press-fit, apply grease to the oil
seal mounting area of the housing and
the periphery of the oil seal.
1-6
(2)
R35Z77SM27
Η
ö
Apply grease to the inner race of the
taper roller bearing (1-6) assembled on
the pinion shaft (1-2).
Press-fit the taper roller bearing (1-8) and
install the plug (1-35).
1-7
1-35
1-2
1-7
Θ
Ι
R35Z77SM28
R35Z77SM41