![background image](http://html1.mh-extra.com/html/hyundai/r35z-7/r35z-7_workshop-manual_2196159361.webp)
7-101
Assemble plate(21) to joint(20).
Screw it to position that it contacts with 4
push rods evenly.
Do not screw it over.
(12)
ö
ö
Tighten joint(20) with the specified torque
to casing, utilizing jig.
(11)
Fit plate(31).
(10)
When return spring is strong in force,
assemble 4 sets at the same time, utilizing
plate(31), and tighten joint(20) temporarily.
(9)
Assemble adjusting nut(22), apply
spanner to width across flat of plate(21) to
fix it, and tighten adjusting nut to the
specified torque.
During tightening, do not change position
of disk.
(13)
ö
RE37 (140-7)
RE38 (140-7)
RE39 (140-7)
RE40 (140-7)