Hyundai Azera 2017 Owner'S Manual Download Page 387

Page: 387 / 497

6-26

What to do in an emergency

To avoid damage to your vehicle
and vehicle components when
towing:

•

Always pull straight ahead
when using the towing hooks.
Do not pull from the side or at
a vertical angle.

•

Do not use the towing hooks
to pull a vehicle out of mud,
sand or other conditions from
which the vehicle cannot be
driven out under its own
power.

•

Limit the vehicle speed to
15 km/h (10 mph) and drive
less than 1.5 km (1 mile) when
towing to avoid serious dam-
age to the automatic
transaxle.

CAUTION

Summary of Contents for Azera 2017


















































































































































































































































































































































































































































































































Search results

Summary of Contents for Azera 2017

Reviews:

Related manuals for Azera 2017

Brands by name

Popular brands

Hyundai Azera 2017, Owner'S Manual

Search results

Summary of Contents for Azera 2017

Reviews:

Related manuals for Azera 2017

Brands by name

Popular brands