manualshive.com logo in svg

Hyundai Azera 2017, Owner'S Manual

Share
Download
Hyundai Azera 2017 Owner'S Manual Download Page 275

5-30

Driving your vehicle

To release :

• If you press the accelerator pedal

with  the shift lever in D (Drive), R
(Reverse) or manual shift mode,
the Auto Hold will be released
automatically and the vehicle will
start to move. The AUTO HOLD
indicator changes from green to
white.

• If the vehicle is restarted using the

cruise control toggle switch (RES+
or SET-) while Auto Hold and cruise
control is operating, the Auto Hold
will be released regardless of
accelerator pedal operation. The
AUTO HOLD indicator changes
from green to white. (if equipped
with cruise control system)

To cancel :

1. Depress the brake pedal.
2. Press the [AUTO HOLD] switch.
The AUTO HOLD indicator will turn
off.

When the AUTO HOLD is auto-
matically released by depress-
ing the accelerator pedal, always
take a look around your vehicle.
Slowly depress the accelerator
pedal for a smooth start.

WARNING  

OIG056032

L

L

L

L

ii

ii

g

g

g

g

h

h

h

h

tt

tt

  

  

o

o

o

o

ff

ff

ff

ff

To prevent, unexpected and sud-
den vehicle movement, ALWAYS
press your foot on the brake
pedal to cancel the Auto Hold
before you:
- Drive downhill.
- Drive the vehicle in R (Reverse).
- Park the vehicle.

WARNING  

Summary of Contents for Azera 2017


















































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands