manualshive.com logo in svg

Hyundai Azera 2017, Owner'S Manual

Share
Download
Hyundai Azera 2017 Owner'S Manual Download Page 462

7-74

Maintenance

3. Remove the socket from the

assembly by turning the socket
counterclockwise until the tabs on
the socket align with the slots on
the assembly.

4. Remove the bulb from the socket

by pressing it in and rotating it
counterclockwise until the tabs on
the bulb align with the slots in the
socket. Pull the bulb out of the
socket.

5. Insert a new bulb by inserting it

into the socket and rotating it until
it locks into place.

6. Install the socket in the assembly

by aligning the tabs on the socket
with the slots in the assembly.
Push the socket into the assembly
and turn the socket clockwise.

Tail lamp, Back up lamp, Rear fog
lamp (if equipped)

If the light bulb does not operate, we
recommend that the system be
checked by an authorized HYUNDAI
dealer.

High mounted stop lamp
replacement

If the high mounted stop lamp does
not operate, we recommend that you
contact an authorized HYUNDAI
dealer.

OIG076044

Stop/Tail lamp

Turn Signal lamp

OIG076041

Summary of Contents for Azera 2017


















































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands