Hyundai Azera 2017 Owner'S Manual Download Page 170

Page: 170 / 497

3-90

Convenient features of your vehicle

SPORT Mode Indicator
Light (if equipped)

This indicator light illuminates

• When you select "SPORT" mode

as drive mode.

For more details, refer to "Drive
Mode Integrated Control System"
in chapter 5.

ECO Mode Indicator
Light (if equipped)

This indicator light illuminates:

• When you select “ECO” mode as

drive mode.

For more details, refer to “Drive
Mode Integrated Control System”
in chapter 5.

Autonomous
Emergency Braking
(AEB) Warning light
(if equipped)

This indicator light illuminates:

• When you set the ignition switch or

Engine Start/Stop button to the ON
position.
- It illuminates for approximately 3

seconds and then goes off.

• When there is a malfunction with

the AEB.

In this case, we recommend that you
have the vehicle inspected by an
authorized HYUNDAI dealer.

For more information, refer to
"Autonomous Emergency Braking
(AEB)" in chapter 5.

SPORT

Do not watch the ECO indicator
light while driving. This will dis-
tract you and may cause an
accident that results in severe
personal injury.

WARNING

Summary of Contents for Azera 2017


















































































































































































































































































































































































































































































































Search results

Summary of Contents for Azera 2017

Reviews:

Related manuals for Azera 2017

Brands by name

Popular brands

Hyundai Azera 2017, Owner'S Manual

Search results

Summary of Contents for Azera 2017

Reviews:

Related manuals for Azera 2017

Brands by name

Popular brands