manualshive.com logo in svg

Hyundai Azera 2017, Owner'S Manual

Share
Download
Hyundai Azera 2017 Owner'S Manual Download Page 151

3-71

Con

venient f

e

atur

es of y

our v

ehicle

3

Warning messages (if equipped)

Shift to "P" position 
(for smart key system and auto-
matic transaxle)

• This warning message illuminates

if you try to turn off the engine with-
out the shift lever in P (Park) posi-
tion.

• At this time, the Engine Start/Stop

button turns to the ACC position (If
you press the Engine Start/Stop
button once more, it will turn to the
ON position).

Low Key Battery 
(for smart key system)

• This warning message illuminates

if the battery of the smart key is
discharged when the Engine
Start/Stop button changes to the
OFF position.

Press start button while turning
wheel (for smart key system)

• This warning message illuminates

if the steering wheel does not
unlock normally when the Engine
Start/Stop button is pressed.

• It means that you should press the

Engine Start/Stop button while turn-
ing the steering wheel right and left.

Steering wheel not locked
(for smart key system)

• This warning message illuminates

if the steering wheel does not lock
when the Engine Start/Stop button
changes to the OFF position.

Check steering wheel lock 
system (for smart key system)

• This warning message illuminates if

the steering wheel does not lock nor-
mally when the Engine Start/Stop
button changes to the OFF position.

Press brake pedal to start engine
(for smart key system and auto-
matic transaxle)

• This warning message illuminates

if the Engine Start/Stop button
changes to the ACC position twice
by pressing the button repeatedly
without depressing the brake pedal.

• It means that you should depress

the brake pedal to start the engine.

Key not in vehicle
(for smart key system)

• This warning message illuminates

if the smart key is not in the vehicle
when you press the Engine
Start/Stop button.

• It means that you always have the

smart key with you.

Key not detected 
(for smart key system)

• This warning message illuminates if

the smart key is not detected when
you press the Engine Start/Stop
button.

Summary of Contents for Azera 2017


















































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands