manualshive.com logo in svg

Hyundai Azera 2017, Owner'S Manual

Share
Download
Hyundai Azera 2017 Owner'S Manual Download Page 118

3-38

Convenient features of your vehicle

When the sunshade is opened

If you pull the sunroof control lever
backward, the sunroof glass will slide
all the way open. To stop the sunroof
movement at any point, pull or push
the sunroof control lever momentarily.

Information 

Only the front glass of the panorama
sunroof opens and closes. 

Tilting the sunroof 

When the sunshade is closed

If you push the sunroof control lever
(1) upward, the sunshade will slide
open then the sunroof glass will tilt.
To stop the sunroof movement at any
point, pull or push the sunroof control
lever (1) momentarily.

When the sunshade is opened

If you push the sunroof control lever
(1) upward, the sunroof glass will tilt.
To stop the sunroof movement at any
point, pull or push the sunroof control
lever momentarily.

Closing the sunroof

To close the sunroof glass only

Push the sunroof control lever (1) for-
ward to the first detent position.

To close the sunroof glass with
the sunshade

Push the sunroof control lever (1) for-
ward to the second detent position.
The sunroof glass will close then the
sunshade close automatically.
To stop the sunroof movement at any
point, push the sunroof control lever
(1) momentarily.

i

OIG046036

OIG046035

Summary of Contents for Azera 2017


















































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands