manualshive.com logo in svg

Hyundai Azera 2017, Owner'S Manual

Share
Download
Hyundai Azera 2017 Owner'S Manual Download Page 363

6-2

The hazard warning flasher serves
as a warning to other drivers to exer-
cise extreme caution when
approaching, overtaking, or passing
your vehicle.
It should be used whenever emer-
gency repairs are being made or
when the vehicle is stopped near the
edge of a roadway.
To turn the hazard warning flasher
on or off, press the hazard warning
flasher button with the Engine
Start/Stop button in any position. The
button is located in the center fascia
panel. All turn signal lights will flash
simultaneously.

• The hazard warning flasher oper-

ates whether your vehicle is run-
ning or not.

• The turn signals do not work when

the hazard flasher is on.

If the engine stalls while driving

• Reduce your speed gradually,

keeping a straight line. Move cau-
tiously off the road to a safe place.

• Turn on your hazard warning flasher.
• Try to start the engine again. If your

vehicle will not start, we recom-
mend that you contact an author-
ized HYUNDAI dealer.

If the engine stalls at a cross-
road or crossing 

If the engine stalls at a crossroad or
crossing, if safe to do so, move the
shift lever to the N (Neutral) position
and then push the vehicle to a safe
location.

If you have a flat tire while
driving 

If a tire goes flat while you are driv-
ing:
• Take your foot off the accelerator

pedal and let the vehicle slow
down while driving straight ahead.

H

HA

AZ

ZA

AR

RD

D  W

WA

AR

RN

NIIN

NG

G  F

FL

LA

AS

SH

HE

ER

R  

What to do in an emergency

IIN

N  C

CA

AS

SE

E  O

OF

F  A

AN

N  E

EM

ME

ER

RG

GE

EN

NC

CY

Y

W

WH

HIIL

LE

E  D

DR

RIIV

VIIN

NG

G  

OIG066001

Summary of Contents for Azera 2017


















































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands