manualshive.com logo in svg

Hyundai Azera 2017, Owner'S Manual

Share
Download
Hyundai Azera 2017 Owner'S Manual Download Page 195

3-115

Con

venient f

e

atur

es of y

our v

ehicle

3

Parking Assist System 
(if equipped)

The Parking Assist System assists
the driver during movement of the
vehicle by chiming if any object is
sensed within the distance of 100 cm
(39 inches) in front and 120 cm (47
inches) behind the vehicle.

This system is a supplemental sys-
tem that senses objects within the
range and location of the sensors, it
cannot detect objects in other areas
where sensors are not installed.

Operation of the Parking Assist
System

Operating condition

• This system will activate when the

Parking Assist System button is
pressed with the engine running.

• The Parking Assist System button

turns on automatically and activates
the Parking Assist System when you
move the shift lever to the R
(Reverse) position. However, if vehi-
cle speed exceeds 10 km/h, the sys-
tem will not warn you even though
objects are detected, and if vehicle
speed exceeds 20 km/h, the system
will turn off automatically. To turn on
the system, press the Parking Assist
System button.

•

ALWAYS look around your vehi-
cle to make sure there are not
any objects or obstacles before
moving the vehicle in any direc-
tion to prevent a collision.

•

Always pay close attention
when the vehicle is driven close
to objects, particularly pedestri-
ans, and especially children.

•

Be aware that some objects
may not be visible on the
screen or be detected by the
sensors, due to the objects
distance, size or material, all of
which can limit the effective-
ness of the sensor.

WARNING

OIG046400 

OIG046401

■

Front

■

Rear

Sensors

Sensor

OIG046481L

Summary of Contents for Azera 2017


















































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands