Hyundai Azera 2017 Owner'S Manual Download Page 148

Page: 148 / 497

3-68

Convenient features of your vehicle

• Automatic Unlock
- Disable: The auto door unlock oper-

ation will be canceled.

- Vehicle Off: All doors will be auto-

matically unlocked when the
Engine Star/Stop button is set to
the OFF position. (if equipped with
smart key)

- On Key Out: All doors will be auto-

matically unlocked when the igni-
tion key is removed from the igni-
tion switch. (if equipped with remote
key)

- On Shift to P: All doors will be auto-

matically unlocked if the automatic
transmission shift lever is shifted to
the P (Park) position.

- Driver Door Unlock: All doors will be

automatically unlocked when the
driver’s door is opened.

• Smart Trunk

To activate or deactivate the Smart
Trunk system.

For more details, refer to "Smart
Trunk" in this chapter.

4. Lights

• One Touch Turn Signal
- Off: The one touch turn signal func-

tion will be deactivated.

- 3, 5, 7 Flashes: The turn signal indi-

cator will blink 3, 5, or 7 times when
the turn signal lever is moved slightly.

For more information, refer to
"Light" in this chapter.

• Ambient Light
- Off : The ambient light of interior will

turn off.

- To activate the brightness of ambi-

ent light from level 1 to level 4.

• Head Lamp Delay
To activate or deactivate the head-
lamp delay function.

For more information, refer to
"Light" in this chapter

• Welcome Light
To activate or deactivate the wel-
come light function.

For more information, refer to
"Light" in this chapter.

5. Sound

• Park Assist System Volume
- Softer/Louder

To adjust the Park Assist System
volume.

• Welcome Sound
To activate or deactivate the wel-
come sound.

Summary of Contents for Azera 2017


















































































































































































































































































































































































































































































































Search results

Summary of Contents for Azera 2017

Reviews:

Related manuals for Azera 2017

Brands by name

Popular brands

Hyundai Azera 2017, Owner'S Manual

Search results

Summary of Contents for Azera 2017

Reviews:

Related manuals for Azera 2017

Brands by name

Popular brands