manualshive.com logo in svg

Hyundai Azera 2017, Owner'S Manual

Share
Download
Hyundai Azera 2017 Owner'S Manual Download Page 36

2-17

Saf
ety system of y

our v

ehicle

2

Forward and rearward adjustment 

The headrest may be adjusted for-
ward to 3 different positions by
pulling the headrest forward to the
desired detent. To adjust the head-
rest to it’s furthest rearwards posi-
tion, pull it fully forward to the farthest
position and release it.

Adjusting the height up and down 

To raise the headrest:
1. Pull it up to the desired position (1).

To lower the headrest:
1. Push and hold the release button

(2) on the headrest support.

2. Lower the headrest to the desired

position (3).

If you recline the seatback towards
the front with the head restraint
and seat cushion raised, the head
restraint may come in contact with
the sunvisor or other parts of the
vehicle.

NOTICE

OIG036008

OIG036009

OLF034015

Summary of Contents for Azera 2017


















































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands