Hyundai Azera 2017, Owner'S Manual

Page: 319 / 497

5-74
Driving your vehicle
LKAS operation
To activate/deactivate the LKAS:
With the ignition switch in
the ON position, press
the LKAS button located
on the instrument panel
on the lower left hand side of the
driver. (Lower right hand side of the
driver for RHD vehicles.)
The indicator in the cluster display
will initially illuminate white. This indi-
cates the LKAS is in the READY but
NOT ENABLED state.
(Continued)
•
When you replace the wind-
shield glass, LKAS camera or
related parts of the steering
wheel, we recommend you
take your vehicle to an author-
ized HYUNDAI dealer and
have the system checked for
calibration.
•
The system detects lane lines
and controls the steering
wheel by a camera, therefore,
if the lane lines are hard to
detect, the system may not
work properly.
Please refer to "Limitations of
the system".
•
Do not remove or damage the
related parts of LKAS.
•
You may not hear a warning
sound of LKAS because of the
excessive audio sound.
•
Do not place objects on the
dashboard that reflects light
such as mirrors, white paper,
etc. The system may malfunc-
tion if the sunlight is reflected.
(Continued)
(Continued)
•
Do not place any accessories
near the rearview mirror.
•
Do not tint the windshield
glass.
•
Always have your hands on
the steering wheel while the
LKAS system is activated. If
you continue to drive with
your hands off the steering
wheel after the "Keep hands
on steering wheel" warning
message appears, the system
will turn off automatically.
•
If vehicle speed is high, steer-
ing torque for assistance will
not be enough to keep your
vehicle within the lane. If so,
the vehicle may move out of
its lane.
•
If you attach objects to the
steering wheel, the system
may not assist steering or the
hands off alarm may not work
properly.
OIG057028L