manualshive.com logo in svg

Hyundai Azera 2017, Owner'S Manual

Share
Download
Hyundai Azera 2017 Owner'S Manual Download Page 183

3-103

Con

venient f

e

atur

es of y

our v

ehicle

3

Headlamp and Parking lamp

When the headlamp (lamp switch in
the headlamp or AUTO position) is on
and all doors (and trunk) are locked
and closed, the parking lamp and
headlamp will come on for 15 seconds
if/or any of the below is performed.
• When the door unlock button is

pressed on the remote key or
smart key.

At this time, if you press the door lock
or unlock button, the parking lamp and
headlamp will turn off immediately.

You can activate or deactivate the
Welcome Light from the User
Settings Mode on the LCD display.

For more details, refer to "LCD
Display" in this chapter.

Interior lamp

When the interior lamp switch is in
the DOOR position and all doors (and
trunk) are closed and locked, the
room lamp will come on for 30 sec-
onds if any of the below is performed.
• When the door unlock button is

pressed on the remote key or
smart key.

• When the button of the outside

door handle is pressed.

At this time, if you press the door lock
or unlock button, the room lamp will
turn off immediately.

Interior lights

Do not use the interior lights for
extended periods when the engine
is turned off or the battery will dis-
charge.

Interior lamp AUTO cut

The interior lamps will automatically
go off approximately 20 minutes after
the engine is turned off and the
doors closed. If a door is opened, the
lamp will go off 40 minutes after the
engine is turned off. If the doors are
locked by the smart key and the vehi-
cle enters the armed stage of the
theft alarm system, the lamps will go
off five seconds later.

NOTICE

Do not use the interior lights
when driving in the dark.The inte-
rior lights may obscure your view
and cause an accident.

WARNING  

Summary of Contents for Azera 2017


















































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands