Hyundai Azera 2017 Owner'S Manual Download

Page: 270 / 497

5-25

Dri
ving y

ur v

ehicle

Releasing the parking brake

To release the EPB (Electronic
Parking Brake), press the EPB
switch in the following condition:

• Place the Engine Start/Stop button

in the ON position.

• Depress the brake pedal.
Make sure the Parking Brake
Warning Light goes off.

To release EPB (Electronic Parking
Brake) automatically:

• Shift lever in P (Park)

With the engine running depress
the brake pedal and shift out of P
(Park) to R (Rear) or D (Drive).

• Shift lever in N (Neutral)

With the engine running depress
the brake pedal and shift out of N
(Neutral) to R (Rear) or D (Drive).

• Satisfy the following conditions

1. Start the engine.
2. Fasten the driver's seat belt.
3. Close the driver's door, engine

hood and trunk.

4. Depress the accelerator pedal

while the shift lever is in R (Rear),
D (Drive) or manual shift mode.

Make sure the Parking Brake
Warning light goes off.

Information

• For your safety, you can engage the

EPB even though the Engine Stop/
Start button is in the OFF position,
but you cannot release it.

• For your safety, depress the brake

pedal and release the parking brake
manually with the EPB switch when
you drive downhill or when backing
up the vehicle.

• If the parking brake warning

light is still on even though the
EPB has been released, we rec-
ommend that the system be
checked by an authorized
HYUNDAI dealer.

• Do not drive your vehicle with

the EPB applied. It may cause
excessive brake pad and brake
rotor wear.

NOTICE

OIG057018L

Summary of Contents for Azera 2017


















































































































































































































































































































































































































































































































Search results

Summary of Contents for Azera 2017

Reviews:

Related manuals for Azera 2017

Brands by name

Popular brands

Hyundai Azera 2017, Owner'S Manual

Search results

Summary of Contents for Azera 2017

Reviews:

Related manuals for Azera 2017

Brands by name

Popular brands